These boxes are produced in Fe 40 (15/10) steel, are worked on Salvagnini lines and continuously welded on the edges in a robotized island. A particular threaded insert mounted on the bottom of the case allows you to fix the sendzimir sheet metal plate inside and any wall fixing tab on the outside. The 20/10 sendzimir sheet metal plate is straight up to a height of 600 mm, from this point onwards it is reinforced by four perimeter folds. Doors with a height greater than 600 mm. they have two perforated profiles with a 25 mm pitch which, in addition to strengthening the structure, allow easy anchoring for any type of application. Sturdy hinges, not visible from the outside, allow an opening of 100° (95 the second internal door - on double door models).

  • Enclosures for electrical panels with IP65 protection rating

  • Painting with textured epoxy-polyester powder color RAL 7035

  • Two-component polyurethane gasket applied in continuous casting by robot

internal dimensions of steel boxes
Type and dimensions of boxes with blind door
and double door (/B)		 internal plate plate center distance
art. art./B W(L) HAS) D(P) Useful depth basic height THE IH
201 250 300 150 135 220 245 190 214
202 250 450 150 135 220 395 190 364
203 203/B 300 300 200 185 270 245 240 214
204 300 400 150 135 270 345 240 314
205 205/B 300 400 200 185 270 345 240 314
206 206/B 300 400 250 135 270 345 240 314
207 207/B 300 600 200 185 270 545 240 514
208 208/B 350 450 180 165 320 395 290 364
209 450 350 200 185 420 295 390 264
210 210/B 400 400 200 185 370 345 340 314
211 400 500 150 135 370 445 340 414
212 212/B 400 500 200 185 370 445 340 414
213 213/B 400 600 200 185 370 545 340 514
214 214/B 400 600 250 235 370 545 340 514
215 215/B 400 600 320 305 370 545 340 514
216 216/B 500 750 250 235 470 695 440 664
217 217/B 500 750 320 305 470 695 440 664
218 218/B 550 850 250 235 520 795 490 764
219 600 400 220 205 570 345 540 314
220 220/B 600 600 250 235 570 545 540 514
*221 **221/B 600 1000 250 235 570 945 540 914
*222 **222/B 600 1000 320 305 570 945 540 914
*223 **223/B 600 1200 250 235 570 1145 540 1114
*224 **224/B 600 1200 320 305 570 1145 540 1114
*225 800 1000 250 235 770 945 740 914
*226 800 1000 320 305 770 945 740 914
*227 800 1200 250 235 770 1145 740 1114
*228 800 1200 320 305 770 1145 740 1114
250 400 600 400 385 370 545 340 514
251 600 600 400 385 570 545 540 514
252 600 800 400 385 570 745 540 714
*253 600 1000 400 385 570 945 540 914
*254 600 1200 400 385 570 1145 540 1114
*255 800 1000 400 385 770 945 740 914
*256 800 1200 400 385 770 1145 740 1114

click on the codes in the table to enter the detailed technical data sheet


Table legend:

ART./B = cabinets with external glass door and internal blind door
The useful depth of the boxes with blind door is 15 mm less than the external overall dimension D(P)
The distance between the external and internal doors is 55 mm
*n°2 cable slots

**n°2 locks

H=1000 tempered glass

 The cable entry slots are positioned only under the boxes, the measurements of the slots are:

 art. 201-2-3-4-5-6-7 with single cable slot of 90 x 200 mm and plate (art. 21P of 120 x 230 mm)

 art. 220-21-22-23-24-51-52-53-54 with 2 cable slots of 90 x 200 mm and 2 plates (art. 21P of 120 x 230 mm)

 art. 208-9-10-11-12-13-14-15-16-17-18-19-50 with single cable slot of 90 x 300 mm and plate (art. 21G of 120 x 330 mm)

 art. 225-26-27-28-55-56 with 2 cable slots of 90 x 300 mm and 2 plates (art. 21G of 120 x 330 mm)

particular plate grounding closing plates hinge
particular glass double doors detail fins for wall fixing cod. art. 76777