Aluminium subracks with single threaded fixing hole profiles M5 for boards with 90 mm centre distance connectors according to DIN 41612, IEC 60603-2 and EN 60603-2, model with 19" flank integrated flange

Subracks for modules manufactured according to the requirements of DIN 41494 and IEC 60297-3 for subunits or electrical boards in EUROCARD format (Europe) or higher with DIN 41612 connectors.

They are suitable for mounting boards with connectors with 90 mm fixing distances according to DIN 41612, IEC 60603-2 and EN 60603-2

These subracks are made with one-piece extruded aluminum side walls incorporating the fin for mounting in 19" rack structures, the front, rear and middle profiles (where present) are single M5 threaded fixing hole.

The side walls and support profiles are treated as standard in cepidine 1000 (conductive and EMC surface treatment that improves the corrosion resistance of aluminum without changing its electrical characteristics).

Natural or coloured anodizing treatment, or other aluminium treatments, are available on request.

The composition of the basic supply, parts and quantities, is shown in the table and includes a minimum number of board guides of appropriate length.
 

Key:
PL= Sidewall
PA= Front profile
PP= Back profile
PM= Median profile
B= Allen screw M 5 x 12
GS= Card Guide
To be ordered separately:
GA = Protection grid
CP = Hood
PD = Component support surface
LF= Threaded strip M 2,5 or M 3
PPR = Low back profile for use of cards with a depth below standard

Back to general subracks list -- >

Front profile with single threaded fastening hole M5

Rear profile for cards with fixture interaxis connectors of 90 mm

Side wall in extruded aluminum with incorporated 19" flange