Electrical panels and consoles with riser and lectern, modular




Console IP 55 with integrated lectern


> For details click the codes in table

 

*codes marked with asterisks have double swing doors

Compact range of consoles with lectern obtained directly on the base. The panels are equipped with an internal plate in galvanized sheet type "sendzimir" thickness 20/10 and is completed with removable plinth, H = 100 mm.

Protection degree: IP55
Construction material: Sheet metal 15 - 20/10.
painting: With epoxy-polyester powders, RAL 7035 peeled.
seal: Two-component polyurethane applied in continuous casting by robot.

Pulpit IP 55 composed of base plus welded lectern bench


> For details click the codes in table

 

*codes marked with asterisks have double swing doors

Compact range of consoles with lectern obtained directly on the base. The panels are equipped with an internal plate in galvanized sheet type "sendzimir" thickness 20/10 and is completed with removable plinth, H = 100 mm.

Protection degree: IP55
Construction material: Sheet metal 15 - 20/10.
painting: With epoxy-polyester powders, RAL 7035 peeled.
seal: Two-component polyurethane applied in continuous casting by robot.

Modular electrical panels



> For details click the codes in table

Mobile: swipescroll through the table


Each of the possible configurations of the 600 series consoles must be composed by ordering each individual piece, to be assembled later. The bases and risers are supplied with a bottom plate already mounted. In addition, roofs and closing bottoms are available, for the use of the bases and risers as independent units.

DEGREE OF PROTECTION IP55

CONSTRUCTION Sheet 20/10

PAINTING With peeled RAL 7035 epoxy-polyester powders

TWO-COMPONENT POLYURETHANE GASKET applied in continuous casting by robot

 

 

EXAMPLES OF CONFIGURATIONS

 

600 series
series 600 B

 

600 SERIES COMPONENTS

BASE WITH MOUNTING PLATE


*Double door

Cable entry slot at the bottom of the base, dimensions 270 x 150 and 497 x 150 mm.
Cable entry on the bottom of the base, dimensions 270 x 150 and 497 x 150 mm.

 

Base with glass door, dimensions 600l x 700h x 500p

GLASS DOOR BASE WITHOUT PLATE
A door with portholes and a blind one. In the door with porthole, the glass, 4 mm thick, is fixed by means of a sealing gasket applied by robot. Optional 550 x 612 inner plate

="https://subrack.eu/img/400x400/621_A.jpg" alt="" width="400" height="400" />

 

PULPIT RISER

The inner plate in galvanized sheet type "sendzimir" thickness 20/10, adjustable in depth, is mounted inside the riser and the base.


pulpit lift

 

SOCKET / PLINTH

Palletizable plinth 100 mm high, consisting of four corners screwed to the base of the structure and four closing panels. The corners are made of 25/10 thick sheet steel, the panels 20/10 thick.

socket

 

LECTERN / READING DESK

In configurations where the lectern is the terminal element of the console, it can be closed with a hinged panel, with 95° opening.


The closing panel of the lectern is equipped as standard with a support piston.

ROOF/BOTTOM FOR BASE / TOP/BOTTOM COVER FOR BASE

ASSEMBLING PLANE

<

 

RACK FRAME 19" / 19" MOUNTING FRAME 12 U / L=550 mm H= 655 mm

part number / art code 650
In addition, hybrid configurations are imaginable in which, within the same base, the rack frame and the instrument plate coexist.
19" rack frames allow hybrid elecrical/electronic configurations.

Contacting Us

Support: info@armadi-rack.it

Phone: +39 051.592119

About Us

subrack.eu + armadi-rack.it© are run by M.D.W. srl - About Us

M.D.W. srl Chamber of Commerce, Bologna
REA n° 465866
PI/CF 02766841205

Legal office:Piazza Minghetti, 4/D
Bologna 40124 BO, Italy

Operating office:Via Edmondo De Amicis 7
Casalecchio di Reno 40033 BO, Italy