Steel boxes and electrical panels, IP65 certified, for indoor use, and control cabinets with DIN rails

-Electronics boxes on DIN rail
-Electrical boxes and panels with galvanized plate
-Floor-standing electrical boxes with vertical development
-Floor-standing electrical boxes with double doors and horizontal development

These monobloc modular panels are made of press-bent and welded sheet steel with internal reinforcement fins to ensure greater resistance to compression and torsion. The shape of the sealing fold of the case creates a sort of "internal gutter" which follows the perimeter of the external door, allowing IP55 sealing of the switchgear to be guaranteed.

The use of special double thread inserts on the back of the case allows the assembly of the internal plate and at the same time the fixing of the panel to external supports (optional art.15 brackets).

The removable rotating frame allows bench wiring of modular devices and switches on DIN rails.

General characteristics :

Load-bearing structure made of sheet steel with press-bent, tacked and welded profile; Cable entry plate, in the lower part of the panel, in 1.5 mm thick sheet steel, with dimensions 170 x 60 mm, (2 slots with a distance between centers of 260 mm in 760 mm wide boxes);
M6 double thread inserts for internal plate fixing and wall installation via fixing tabs (optional);

Front door hinged on the left with 100° opening angle, cremone lock with double bar insert and ZAMA key;

Two-component polyurethane gasket applied in continuous casting by robot;
Internal plate in 2 mm thick Sendzimir galvanized steel sheet (optional);

Painting with thermosetting epoxy-polyester powders in standard RAL 7035 textured colour, special colors on request;
Available in two depths 200-250 mm.
Available with external blind door or external glass door (items /A), the glasses are sealed with single-component thixotropic polyurethane material;
Self-cleaning grounding pin.
Opening plinth h 50 mm (optional)

click codes in the table to enter the detailed technical sheet

comparison table 250 mm deep panels

clicked the code of interest to enter the detailed technical sheet

Revolving and removable frame
(necessary to mount modular panels)

code	dimensions (mm)
	L	A
80.4T	505	430
80.6T	505	630
80.8T	505	830
80.10T	505	1030
80.12T	505	1230
80.14T	505	1430
80.16T	505	1630
80.24T	705	430
80.26T	705	630
80.28T	705	830
80.30T	705	1030
80.32T	705	1230
80.34T	705	1430
80.36T	705	1630

Blank panels and panels with slots plus DIN rails, screwed
(to be mounted on the revolving frame)

code	dimensions (mm)		width (mm) and number of slits
	L	A
A-720C	458	200		screws and fastening accessories are included in the panel codes in the codes with one or more slots the DIN guides and relative fixing brackets are included
A-721C	458	400
A-723C	458	600
A-720F	458	200	387 x 1
A-721F	458	400	387 x 2
A-723F	458	600	387 x 3
A-730C	658	200
A-731C	658	400
A-733C	658	600
A-730F	658	200	597 x 1
A-731F	658	400	597 x 2
A-733F	658	600	597 x 3

Blank panels and panels with slots plus DIN guides, hinged
(to be mounted on the revolving frame)

code	dimensions (mm)		width (mm) and number of slits
	L	A
I-720C	458	200		depending on the positioning of the bracket art. 10 the distance between the DIN rail and the panel is 50 or 65 mm
I-721C	458	400
I-723C	458	600
I-720F	458	200	387 x 1
I-721F	458	400	387 x 2
I-723F	458	600	387 x 3
I-730C	658	200
I-731C	658	400
I-733C	658	600
I-730F	658	200	597 x 1
I-731F	658	400	597 x 2
I-733F	658	600	597 x 3

unique plates
(to be mounted directly on the bottom)

code	dimensions (mm)
	L	A
80.4P	524	428
80.6P	524	628
80.8P	524	828
80.10P	524	1028
80.12P	524	1228
80.14P	524	1428
80.16P	524	1628
80.24P	724	428
80.26P	724	628
80.28P	724	828
80.30P	724	1028
80.32P	724	1228
80.34P	724	1428
80.36P	724	1628

modular plates
(to be mounted on the attack guides for plates)

code	dimensions (mm)
	L	A
20P	524	200
22P	524	400
30P	724	200
32P	724	400

attack guides for plates
(for modular plates mount)

code	guide height (mm)	for high cassettes (mm)
80.40	430	480
80.60	630	680
80.80	830	880
80.100	1030	1080
80.120	1230	1280
80.140	1430	1480
80.160	1630	1680

opening plinth, height 50 mm
(it mounts directly to the 4 inserts present on the bottom of the tape)

code	dimensions (mm)
	L	P
80.50	560	175
80.70	760	175
80.501	560	225
80.701	760	225

The 200 series boxes are made using the most modern production systems. Each production phase is carried out by automatic numerical control machines which allow maximum precision and reliability of the product. The boxes are produced in Fe 40 steel, are worked on Salvagnini lines and continuously welded on the edges in a robotized island. A particular threaded insert mounted on the bottom of the case allows you to fix the sendzimir sheet metal plate inside and any wall fixing tab on the outside. The 20/10 sendzimir sheet metal plate is straight up to a height of 600 mm, from this point onwards it is reinforced by four perimeter folds. Doors with a height greater than 600 mm. they have two perforated profiles with a 25 mm pitch which, in addition to strengthening the structure, allow easy anchoring for any type of application. Sturdy hinges, not visible from the outside, allow an opening of 100° (95 the second internal door - on double door models).
Only on models with double doors, external door with glass porthole, 4 mm thick, sealed by robot with single-component thixotropic polyurethane material, internal blind door with 95° opening radius

Enclosures for electrical panels with IP65 protection rating

12 – 15/10 sheet metal construction

Painting with textured epoxy-polyester powder color RAL 7035 (on request for minimum batches of 20 pieces different colors or pure polyester painting can be made)

Two-component polyurethane gasket applied in continuous casting by robot

Standard on all 200 series boxes:

3 mm double bar lock

bottom plate in "sendzimir" type galvanized sheet metal, thickness 20/10

drainage hole

self-cleaning earth pin to ensure perfect earthing even on painted components

closing plates for cable passage slots in self-extinguishing material


Optional :

fins for wall fixing article code 76777 - 15

Upon request, you can mount keyhole locks cod. EK 333 , lock with handle , locks to FIAT type , shutter locks.

Upon request, even for a few pieces, mechanical machining of both the case and the internal galvanized plate is carried out.

Special brackets, additional rain roofs or other special parts can also be made.

Frames and frames with 19" pitch rack uprights can also be purchased for the installation of network equipment or other objects designed for rack cabinets.

click codes in the table to enter the detailed technical sheet

3 mm double bar cremone lock. It is possible to fit a handle lock with key (art. 27).	doors are recessed and the hinges are internal.	Recessed door with sealing gasket.
The doors are equipped with expanded polyurethane gaskets applied in continuous casting by robot.	Double cable slot, closed with plates in self-extinguishing material (on art. 354 - 356 - 358).	As standard, the panels are supplied with a bottom plate, made from "sendzimir" type galvanized sheet metal, thickness 20/10.

The cassettes of the 380 series have construction characteristics completely similar to those of the 350 series and therefore cover the same type of applications, they are particularly suitable for those cases in which a longitudinal section greater than the transversal one is required.

Degree Protection IP55
CONSTRUCTION : Sheet 15-20/10.
PAINTING : With epoxy-polyester powders, textured RAL 7035.
GASKET : Two-component polyurethane applied in continuous casting by robot.

2 cable entry slots in the roof and 2 in the base measuring 170x60mm	The doors are recessed and the hinges are internal.	3 mm double bar cremone lock. It is possible to fit a handle lock with key (art. 27).
The doors are equipped with expanded polyurethane gaskets applied in continuous casting by robot.	Double cable slot, both on the roof and on the base, closed with plates in self-extinguishing material.	As standard, the panels are supplied with a bottom plate, made from "sendzimir" type galvanized sheet metal, thickness 20/10.