Aluminum subracks with single M5 threaded fixing holes profiles for boards with direct insertion or backplane connectors, model with 19" flange integrated in the side

Subracks for modules manufactured according to the requirements of DIN 41494 and IEC 60297-3 for subunits or electrical boards in Eurocard format (Europe) or higher with direct insertion or backplane connectors.

They are suitable for mounting backplanes (Mother board) with the application of connectors of various types or for the use of direct insertion connectors type MIL - C - 21097.

These subracks are made with one-piece extruded aluminum side walls incorporating the fin for mounting in 19" rack structures, the front, rear and middle profiles (where present) are single M5 threaded fixing hole.

The side walls and support profiles are treated as standard in cepidine 1000 (conductive and EMC surface treatment that improves the corrosion resistance of aluminum without changing its electrical characteristics).

Natural or coloured anodizing treatment, or other aluminium treatments, are available on request.

The composition of the basic supply, parts and quantities, is shown in the table and includes a minimum number of board guides of appropriate length.

Synoptic table of the series clicked the codes in the table to enter the detailed technical sheet

Back to the general subracks list -- >

Subracks for backplane with single hole profiles M5			composition of supply and quantity single parts clicks in table to open the technical tabs
Number of units	Depth	Code	PL	PA	PP	PM	B	LI	LF	GS
1 x 3U	178 239	S13211111 S13311111	2 2	2 2	2 2		8 8	2 2	2 2	10 10
1 x 6U	178 239	S46211111 S46311111	2 2	2 2	2 2	1 1	10 10	4 4	4 4	10 10
2 x 3U	178 239	S26211111 S26311111	2 2	4 4	4 4		16 16	4 4	4 4	20 20
1 x 9U	178 239	S09211111 S09311111	2 2	2 2	2 2	2 2	12 12	6 6	2 2	10 10
1 x 3U + 1 x 6U	178 239	S69211111 S69311111	2 2	4 4	4 4	1 1	18 18	6 6	4 4	20 20
3 x 3U	178 239	S39211111 S39311111	2 2	6 6	6 6		24 24	6 6	6 6	30 30

Legend :

PL = Side Profile
PA = Front Profile
PP = Back Profile
PM = Median Profile
B = Allen screw M 5 x 12
LI = Insulation Listing
LF = Listello threaded M 2.5
GS = Card Help
To be ordered separately :
GA = Protection grids
CP = Protection hood
PD = Component Support Plan
LF= Threaded strip M 2.5 or M 3
LD = Conductive spacer strip
PPR = Lowered rear profile for use with cards depth less than standard

 

BZ = Z-shaped bar (for direct attachment of special connectors)

Back to general list subracks -- >

Front profile with single threaded fastening hole M5

Plane rear profile for subracks with backplane

 

Side wall in extruded aluminum with flange 19 " incorporated